Freeplugz

Tokyo Dawn Labs releases TDR Feedback Compressor 1.0

September 10, 2012 in Featured, News with 0 Comments

Tokyo Dawn Labs has released version 1.0.0 of the TDR Feedback Compressor, a free VST effect plug-in for 32- and 64-bit Windows.

TDR Feedback Compressor is a carefully designed RMS-based dynamic range compressor. The processor is dedicated to sum/bus compression and is the result of an intensive study about the musical behavior of “classic” feed-back compressor designs. Most modern compressors analyze the input signal to control gain reduction. The feed-back compressor design however “listens” to its output. This non-intuitive approach delivers an unobtrusive and highly musical compression characteristic that is able to handle complex signals with ease.

TDR Feedback Compressor

TDR Feedback Compressor

Tokyo Dawn Labs want to emphasize the fact that the processor neither tries to emulate any previously available device, nor does it follow popular trends like “virtual analogue”, “vintage” or similar buzz terms. This is a proud digital processor, made an immense amount of love and care.

TDR Feedback Compressor features:

  • Typical “Feed-Back Compression” musicality and behavior.
  • All relevant calculations are done at 64-bit precision.
  • Differential oversampling structure (only the “wet” part is oversampled).
  • Re-sampling via high quality linear phase filters.
  • Advanced stereo-linking (reduces audible cross-modulation).
  • Adaptive integration time RMS detector. Optional PEAK and tunable RMS detection.
  • Freely adjustable compression knee.
  • Upward compression mode.
  • Optional 6dB/oct and 3dB oct HP filters in the side-chain path.
  • Optional low and high frequency harmonic distortion.
  • Independent release controls for fast and slow program material.
  • Delta preview mode. Allows to preview the difference between compressed and original signal.
  • Latency compensated parallel bypass (i.e. processing not interrupted).

TDR Feedback Compressor is available for download as a free VST plugin for 32 and 64 bit Windows at Tokyo Dawn Labs.

Sir Elliot releases GPA-2 preamplifier free plug-in

September 9, 2012 in News with 0 Comments
Sir Elliot GPA-2 Preamplifier

Sir Elliot GPA-2 Preamplifier

Sir Elliot has announced the release of the GPA-2, a free preamplifier VST effect plug-in for Windows.

The GPA-2 is designed to dampen the audio signal. Each Auxiliary input will offer its own tonal characteristic. The new features from the previous model are the following:

  • High Damping Factor
  • Cross talk
  • Output LED Display
  • Over Sample Rate Protection

GPA-2 Preamplifier specifications:

  • Frequency Bandwidth: +/- 3 dB 22.7 Hz – 22,000 kHz (44.1 kHz – 96 kHz)
  • Over Sample Rate Protection: 105 kHz and above
  • Cross talk: – 20 dB

The GPA-2 is best suited for Jazz, Rhythm & Blues, in addition to Lounge Music.

Coming Soon from Sir Elliot on Vimeo.

The GPA-2 Preamplifier is available to download as free VST plug-in for windows at Sir Elliot.

Lostin70s releases Devil’s Tube Spring a Free spring reverb plug-in

September 9, 2012 in News with 0 Comments
Devil's tube Spring Reverb plugin

Devil’s tube Spring Reverb

Lostin70s releases Devil’s Tube Spring a simple low delay Spring Reverb based on convolution. There is a choice between two spring types (one with 2 springs and one with 3 springs and a clearer timbre).

Devil’s tube Spring Features :

  • You can choose the spring model.
  • You can adjust the amount of reverb : 0dB means Dry output, The dry level is keep unchanged while you increase the amount of reverb, so be careful of saturation.
  • You can adjust the length of the reverb: HQ mode means the original full length (and full Impulse response, Need higher CPU ), Std means the standard spring length (at lower CPU than HQ mode).
  • No added Delay by the plugin (the delay depends only on the sound card and host plugin delay) for better live experience.

Devil’s tube Spring is available to download as a 32/64 bit plugin for Windows at Lostin70s.

Vintage Cheese releases Cheap Cheese organ VST plug-in

September 8, 2012 in News with 0 Comments
Cheap Cheese organ VST

Cheap Cheese vintage organ

Vintage Cheese has released Cheap Cheese, a free organ VST instrument for Windows.

I’m really pleased to announce the release of the “Cheap Cheese” VST® Instrument.
It’s a vintage organ modelled after some famous home combo organs of the 70’s.

Cheap Cheese features:

  • Vibrato
  • Four organ stops
  • Bass Chords
  • One octave bass
  • Bass and organ volume control
  • Contour tone knob

Cheap Cheese is available to download for free as a 32 bit VST plug-in for Windows at Vintage Cheese.

Kotkas sets Paax 3 Pro VST Sampler Free

September 6, 2012 in Featured, News with 0 Comments

Kotkas has announced that Paax 3 Pro, a VSTi sampler plug-in for Windows, that previously cost $45 is now available for free (registration required).

Paax 3 Pro sampler vst

Paax 3 Pro is now free

Features:

  • 256 simultaneous voices.
  • Optimized audio engine (~20% faster than v2.x).
  • New Multi-mode filter (low pass, high pass, band pass, band stop) with up to 30 dB res.
  • Improved MicroGranular time-domain technology for advanced time-stretching and pitch-shifting; individual settings for sound duration, fundamental (tone) and harmonics (timbre) transposition.
  • New direct disk streaming option for straight-from-the-drive sample playback (no need for lots of RAM).
  • Access to the advanced control panel, for tweaking each split-layer-channel.
  • Up to 4 stereo VST outputs with individual attenuation and pan controls. Different splits can be routed to separate outputs.
  • Up to 8 configurable stereo effect units (4 pairs, one per VST output).
  • Up to 128 presets per bank.
  • Up to 84 splits per preset and 8 dual velocity-layers (16 samples) per split.
  • Plays 8/16/24/32 bit, mono/stereo wav files @ any sample rate.
  • Imports SoundFonts (.sf2), DS-404 (.404) and AKAI S5000/6000 programs (.akp).
  • Low aliasing resampling technology, 32 bit audio engine.
  • 3 envelope controls (DAHDSR) per preset: amplitude, pitch and filter cutoff.
  • 3 configurable LFOs per preset: tremolo, vibrato and filter cutoff with optional delay.
  • All envelopes and oscillators can be synchronized to MIDI tempo.
  • Bank format offers choice for embedded or referenced samples.
  • Fully automatable at the preset level.

Visit www.kotkasuniverse.com for more info and download link.

vladg/sound updates Limiter No6 VST effect to v1.0.1

September 6, 2012 in News with 0 Comments
vladg/sound limiter effect

Limiter No6 is a free limiter suited for mastering

Vladg/sound has updated Limiter No6, a freeware modular limiter suited for mastering purposes, to version 1.0.1.

Changes in 1.0.1:

  • Mac VST version 64-bit support added;
  • Fixed CPU-related GUI issues;
  • Support of DirectX acceleration for Vista/Seven (less CPU for graphics).

Limiter No6 is available to download as a free VST plugin for Windows and Mac OS at Vladg/sound.

Page 23 of 24« First...10...2021222324
Subscribe to FreePlugz via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 722 other subscribers

Comments
  • Alan Esoteric Corns: i love this 30 band eq. View Post
  • LUCAS: ES EL MEGOR View Post
  • plugz: Works great here. Maybe you can try directly their Mediafire @ http://www.mediafire.com/mildonstudios View Post
  • oska: site shows forbidden View Post
  • complexsound: The best characteristic of this synth is that it is extremely simple and easy to use. I like the sound especially playing keys and basses in poliphonic mode. Would be fine add modulation to the LFO with the Mod. Envelope. Check this soundbank! http://complexsound.wordpress.com/2013/06/05/rebeld-free-soundset-for-charlatan/ Cheers. Complex. View Post
Prime Loops - we're in the mix